Vehicle wraps' dynamic four color images on moving vehicles of any size or shape will definitely turn heads and generate incremental sales for your company. It is like a traveling billboard that never comes down! No other form of advertising is as effective in gaining and holding the viewers' attention for your company or brand.

How Many Miles Do You Drive Each Day? Each Week? Each Year?
And how many people do you think share the road with you? There could be hundreds, possibly thousands, over a full year. Imagine all those people seeing YOUR website address or company's logo and phone number and seeing it everyday, everywhere you go!

Design
Concepting your print ideas and images into reality is done through a variety of resources. For vehicles, JFR Graphics has a complete digital library of accurate templates built 1/20th to scale, to aid in the design project. We are happy to provide a design concept for you or email a template of your vehicle upon request. When color is absolutely critical, small cross sectional proofs can be printed for your initial approval. Throughout the design phase of your project, we will work closely with you in every aspect of your identity program.

Power Washing Exterior Graphics
Wrapped vehicles may be power-washed or pressure-washed with care. Excessive pressure during power washing can damage the graphic by allowing water to get underneath the vinyl and lessen its adhesion to the vehicle surface, causing the vinyl to lift or curl. These problems are magnified by wind. This is a critical problem for perforated window graphic film.

To avoid edge lifting or other damage to the vinyl, follow these important steps:
1. Use a spray nozzle with a 40° wide spray pattern.
2. Be sure the spray nozzle includes a nozzle protector (tip guard).
3. Use a pressure of 2000 psi or less.
4. If the system is heated, limit the water temperature to 180°F or less.
5. Hold nozzle at least 12 inches away from and perpendicular to the graphic.
6. Do not direct the water stream at a sharp angle to the edge of the graphic.

Automatic Brush Washing
Automatic brush washing is possible, but not advised. If you choose to clean the vehicle in this manner, keep these two points in mind:
1. Brushes can catch a loose edge of the graphic and cause further damage to the graphic.
2. Brushes can dull the finish of the graphic.

Hand Washing Exterior Graphics
1. Flush the graphic with clean water to remove loose dirt particles. A trigger-type hose nozzle is convenient for this purpose.
2. Use a mild liquid detergent and water solution and wash the graphic with a soft brush, rag or sponge. Wash thoroughly from the top down. Avoid abrading the graphic by unnecessary scrubbing. After applying the cleaning solution, keep a steady stream of water flowing on the graphic to wash away dirt particles.
3. Rinse the entire graphic thoroughly with clean water. Air dry.

Removing Difficult Contaminants
Some contaminants may remain after following the normal cleaning procedures. Most contaminants can be removed using one of the following methods.
1. To remove tar, oil, diesel smut or bituminous material: Wipe with a rag dampened with kerosene or mineral spirits. Do not use other solvents. Wash immediately with detergent and water, then rinse with clean water.
2. To remove pollen and fungus: Wash the graphic with a full-strength household bleach solution or mild liquid detergent and water. Rinse with clean water immediately.
3. To remove crayon, lipstick, or similar materials: Select an appropriate solvent and test it in an inconspicuous area to ensure it removes the contaminant without damaging the graphic. Wash immediately with mild liquid detergent and water, then rinse with clean water.

Pricing
The price of wraps is based on number of square feet (SQFT). For exact pricing please contact us. Give us a call at 870.886.6999 or email us with your ideas at jfrmotorsports@yahoo.com or fax us at 870.886.6716.